MT-InSAR and Dam Modeling for the Comprehensive Monitoring of an Earth-Fill Dam: The Case of the Benínar Dam (Almería, Spain)
Metadata
Show full item recordEditorial
MDPI
Materia
InSAR Embankment dams FEM Auscultation Subsidence
Date
2023-05-28Referencia bibliográfica
Marchamalo-Sacristán,M.; Ruiz-Armenteros,A.M.; Lamas-Fernández, F.;González-Rodrigo, B.;Martínez-Marín, R.;Delgado-Blasco, J.M.; Bakon,M.; Lazecky,M.; Perissin,D.; Papco, J.; et al. MT-InSAR and Dam Modeling for the Comprehensive Monitoring of an Earth-Fill Dam: The Case of the Benínar Dam (Almería, Spain). Remote Sens. 2023, 15, 2802. [https://doi.org/10.3390/rs15112802]
Sponsorship
ReMoDams project ESP2017-89344-R (AEI/FEDER, UE) from the Spanish Ministry of Economy, Industry and Competitiveness; SIAGUA project PID2021-128123OB-C21; PID2021-128123OB-C22; MCIN/AEI/10.13039/ 501100011033/FEDER,UE; POAIUJA-2023/2024; CEACTEMA from University of Jaén (Spain); RNM-282 research group from the Junta de Andalucía (Spain)Abstract
The Benínar Dam, located in Southeastern Spain, is an earth-fill dam that has experienced filtration issues since its construction in 1985. Despite the installation of various monitoring systems, the data collected are sparse and inadequate for the dam’s lifetime. The present research integrates Multi-Temporal Interferometric Synthetic Aperture Radar (MT-InSAR) and dam modeling to validate the monitoring of this dam, opening the way to enhanced integrated monitoring systems. MT-InSAR was proved to be a reliable and continuous monitoring system for dam deformation, surpassing previously installed systems in terms of precision. MT-InSAR allowed the almost-continuous monitoring of this dam since 1992, combining ERS, Envisat, and Sentinel-1A/B data. Line-of-sight (LOS) velocities of settlement in the crest of the dam evolved from maximums of −6 mm/year (1992–2000), −4 mm/year (2002–2010), and −2 mm/year (2015–2021) with median values of −2.6 and −3.0 mm/year in the first periods (ERS and Envisat) and −1.3 mm/year in the Sentinel 1-A/B period. These results are consistent with the maximum admissible modeled deformation from construction, confirming that settlement was more intense in the dam’s early stages and decreased over time. MT-InSAR was also used to integrate the monitoring of the dam basin, including critical slopes, quarries, and infrastructures, such as roads, tracks, and spillways. This study allows us to conclude that MT-InSAR and dam modeling are important elements for the integrated monitoring systems of embankment dams. This conclusion supports the complete integration of MT-InSAR and 3D modeling into the monitoring systems of embankment dams, as they are a key complement to traditional geotechnical monitoring and can overcome the main limitations of topographical monitoring