Predictive Model of Clothing Insulation in Naturally Ventilated Educational Buildings
Metadata
Show full item recordAuthor
De la Hoz Torres, María Luisa; Aguilar Aguilera, Antonio Jesús; Ruiz Padillo, Diego Pablo; Martínez Aires, María DoloresEditorial
MDPI
Materia
Built environment Educational buildings Thermal environment Clothing insulation Occupant behaviour Natural ventilation
Date
2023-04-10Referencia bibliográfica
de la Hoz-Torres, M.L.; Aguilar, A.J.; Costa, N.; Arezes, P.; Ruiz, D.P.; Martínez-Aires, M.D. Predictive Model of Clothing Insulation in Naturally Ventilated Educational Buildings. Buildings 2023, 13, 1002. [https://doi.org/10.3390/buildings13041002]
Sponsorship
MCIN/AEI PID2019-108761RB-I00Abstract
Providing suitable indoor thermal conditions in educational buildings is crucial to ensuring the performance and well-being of students. International standards and building codes state that thermal conditions should be considered during the indoor design process and sizing of heating, ventilation and air conditioning systems. Clothing insulation is one of the main factors influencing the occupants' thermal perception. In this context, a field survey was conducted in higher education buildings to analyse and evaluate the clothing insulation of university students. The results showed that the mean clothing insulation values were 0.60 clo and 0.72 clo for male and female students, respectively. Significant differences were found between seasons. Correlations were found between indoor and outdoor air temperature, radiant temperature, the temperature measured at 6 a.m., and running mean temperature. Based on the collected data, a predictive clothing insulation model, based on an artificial neural network (ANN) algorithm, was developed using indoor and outdoor air temperature, radiant temperature, the temperature measured at 6 a.m. and running mean temperature, gender, and season as input parameters. The ANN model showed a performance of R-2 = 0.60 and r = 0.80. Fifty percent of the predicted values differed by less than 0.1 clo from the actual value, whereas this percentage only amounted to 32% if the model defined in the ASHRAE-55 Standard was applied.