Factors selection in landslide susceptibility modelling on large scale following the gis matrix method: application to the river Beiro basin (Spain)

Abstract

A procedure to select the controlling factors connected to the slope instability has been defined. It allowed us to assess the landslide susceptibility in the Rio Beiro basin (about 10 km2) over the northeastern area of the city of Granada (Spain). Field and remote (Google EarthTM) recognition techniques allowed us to generate a landslide inventory consisting in 127 phenomena. To discriminate between stable and unstable conditions, a diagnostic area had been chosen as the one limited to the crown and the toe of the scarp of the landslide. 15 controlling or determining factors have been defined considering topographic, geologic, geomorphologic and pedologic available data. Univariate tests, using both association coefficients and validation results of single-variable susceptibility models, allowed us to select the best predictors, which were combined for the unique conditions analysis. For each of the five recognised landslide typologies, susceptibility maps for the best models were prepared. In order to verify both the goodness of fit and the prediction skill of the susceptibility models, two different validation procedures were applied and compared. Both procedures are based on a random partition of the landslide archive for producing a test and a training subset. The first method is based on the analysis of the shape of the success and prediction rate curves, which are quantitatively analysed exploiting two morphometric indexes. The second method is based on the analysis of the degree of fit, by considering the relative error between the intersected target landslides by each of the different susceptibility classes in which the study area was partitioned. Both the validation procedures confirmed a very good predictive performance of the susceptibility models and of the actual procedure followed to select the controlling factors.