Colloidal Stability and Magnetic Field-Induced Ordering of Magnetorheological Fluids Studied with a Quartz Crystal Microbalance Rodríguez López, Jaime Villar Castro, Pedro Vicente Álvarez-Manzaneda, Juan De Johannsmann, Diethelm Elvira, Luis Morillas Medina, José Rafael Montero de Espinosa, Francisco TSM resonator Magnetorheological fluid QCM This work proposes the use of quartz crystal microbalances (QCMs) as a method to analyze and characterize magnetorheological (MR) fluids. QCM devices are sensitive to changes in mass, surface interactions, and viscoelastic properties of the medium contacting its surface. These features make the QCM suitable to study MR fluids and their response to variable environmental conditions. MR fluids change their structure and viscoelastic properties under the action of an external magnetic field, this change being determined by the particle volume fraction, the magnetic field strength, and the presence of thixotropic agents among other factors. In this work, the measurement of the resonance parameters (resonance frequency and dissipation factor) of a QCM are used to analyze the behavior of MR fluids in static conditions (that is, in the absence of external mechanical stresses). The influence of sedimentation under gravity and the application of magnetic fields on the shifts of resonance frequency and dissipation factor were measured and discussed in the frame of the coupled resonance produced by particles touching the QCM surface. Furthermore, the MR-fluid/QCM system has a great potential for the study of high-frequency contact mechanics because the translational and rotational stiffness of the link between the surface and the particles can be tuned by the magnetic field. 2024-10-01T10:09:50Z 2024-10-01T10:09:50Z 2015-12-15 journal article Rodriguez López. J. et. al. Sensors 2015, 15, 30443–30456. [https://doi.org/10.3390/s151229808] https://hdl.handle.net/10481/95339 10.3390/s151229808 eng http://creativecommons.org/licenses/by/4.0/ open access Atribución 4.0 Internacional MDPI