Microstructural analysis of concretes manufactured with recycled coarse aggregates pre-soaked using different methods Sánchez Roldán, Zoraida Valverde Palacios, Ignacio Valverde Espinosa, Ignacio Martín-Morales, María Concrete Interstitial Zone Waste treatment Microstructure Image analysis Hormigón Zona interfacial Tratamiento de residuos Microestructura Análisis de imágenes Recycled concrete has a microstructure more complex than natural concrete, as it includes new interfacial transition zones, the quality of which is conditioned by the state of humidity of the aggregates used, which in turn will affect the final properties of the concrete. Bearing in mind the greater absorption capacity of recycled aggregates, it is important to improve its properties by means of a treatment method that is capable of reducing the negative effects that this may produce in the new concrete. Therefore, the influence of the presoaking method of recycled aggregates on the formation of the microstructure of concretes manufactured with these aggregates is analysed, to determine which treatment is the most effective for the production of concretes for non-structural use. The results show that the microstructure of the evaluated concretes differs according to the treatment method used, the most optimal method being one that uses aggregates without pre-soaking. Análisis microestructural de hormigones fabricados con áridos gruesos reciclados premojados según diferentes métodos. El hormigón reciclado tiene una microestructura más compleja que el natural, ya que incluye nuevas zonas de transición interfacial, cuya calidad está condicionada por el estado de humedad de los áridos utilizados, lo que a su vez repercutirá en las propiedades finales del hormigón. Teniendo en cuenta la mayor capacidad de absorción de los áridos reciclados, se considera fundamental la mejora de sus propiedades, mediante un método de tratamiento que sea capaz de disminuir los efectos negativos que éstos puedan producir en el hormigón. Por ello, se analiza la influencia del método de premojado de los áridos reciclados en la formación de la microestructura de hormigones fabricados con estos áridos, para así determinar qué tratamiento es el más eficaz. Los resultados muestran que la microestructura de los hormigones evaluados difiere según el método de tratamiento utilizado, siendo el más óptimo el que utiliza los áridos sin premojar. 2020-11-05T10:41:51Z 2020-11-05T10:41:51Z 2020 info:eu-repo/semantics/article Sánchez-Roldán, Z., Valverde-Palacios, I., Valverde-Espinosa, I., & Martín-Morales, M. (2020). Microstructural analysis of concretes manufactured with recycled coarse aggregates pre-soaked using different methods. Materiales de Construcción, 70(339), e228. [doi: http://dx.doi.org/10.3989/mc.2020.16919] http://hdl.handle.net/10481/64076 10.3989/mc.2020.16919 eng http://creativecommons.org/licenses/by/3.0/es/ info:eu-repo/semantics/openAccess Atribución 3.0 España CONSEJO SUPERIOR INVESTIGACIONES CIENTIFICAS-CSIC