Catalysts Supported on Carbon Materials for the Selective Hydrogenation of Citral Bailón García, Esther Maldonado Hodar, Francisco José Pérez Cadenas, Agustín Francisco Carrasco Marín, Francisco Citral Hydrogenation Activated carbon Graphite Carbon nanotubes The heterogeneously catalyzed selective-hydrogenation of citral is one of the more feasible ways for obtaining its appreciated unsaturated-alcohols, nerol and geraniol, which are present in over 250 essential oils. Thus, citral has very recently come to be produced petro-chemically in very large quantities, and so partial hydrogenation of citral has become a very economical route for the production of these compounds. However, the selective hydrogenation of citral is not easy, because citral is an α,β-unsaturated aldehyde which possesses three double bonds that can be hydrogenated: an isolated C=C bond and the conjugated C=O and C=C bonds. For this reason, in catalyst selection there are several important issues which affect the product selectivity, for example, the active metal and metal particle size which are factors related to the catalyst preparation method, catalyst precursor, or support surface area, as well as other factors such as porosity, the addition of a second catalytic metal, and, of course, the type of catalyst support. About this last one, carbon materials are very interesting supports for this type of hydrogenation reaction due to their unique chemical and textural properties. This review collects and analyzes the results obtained in the selective hydrogenation of citral catalyzed by carbon material supported metals. 2014-09-02T12:38:03Z 2014-09-02T12:38:03Z 2013 journal article Bailón-García, E.; et al. Catalysts Supported on Carbon Materials for the Selective Hydrogenation of Citral. Catalysts, 3(4): 853-877 (2013). [http://hdl.handle.net/10481/32875] 2073-4344 http://hdl.handle.net/10481/32875 10.3390/catal3040853 eng open access MDPI