Petrographic and petrophysical characterization of the main aerial and hydraulic mortars used in the construction and rehabilitation sectors Parra-Fernández, Clara Varas-Muriel, María Josefa Hydraulic mortars Aerial mortars Petrographic characterization Morteros hidráulicos Morteros aéreos Caracterización petrográfica This work has been funded within the project TOP-HERITAGE-Technologies in Heritage Sciences (S2018/NMT-4372) of the Community of Madrid. Clara Parra-Fernández is a PhD student under the FPI grant of the Ministry of Science and Innovation and the State Research Agency of Spain (PRE2021-098699) Petrographic and petrophysical characterization of aerial and hydraulic mortars allows their differentiation and the establishment of their most suitable applications. Natural, aerial or hydraulic lime mortars as well as artificial cements mortars present different physical properties. It shall be noted that physical characteristics, which depend on petrographic characteristics, impact on its mechanical properties. Therefore, this comparative study with standardised techniques and tests, has analysed these mortars from a petrographic, petrophysical and mechanical point of view. The chemical processes and porosity originated during mortar production and subsequent curing phase explain mortar physical behaviour (hardness, strength, as well as fluid access and retention). This study confirms that air lime mortars are the most porous and least resistant while cement mortars are the most resistant and impermeable. Finally, natural hydraulic lime mortars, with petrographic characteristics similar to cement mortars, have physical-mechanical properties close to aerial ones, although they are more impermeable and resistant. Caracterización petrográfica y petrofísica de los principales morteros aéreos e hidráulicos usados en los sectores de la construcción y la rehabilitación . La caracterización petrográfica y petrofísica de los morteros aéreos e hidráulicos permite distinguirlos y establecer sus aplicaciones más adecuadas. Los morteros de cales naturales, aéreas o hidráulicas, y cementos artificiales, presentan diferentes propiedades físicas. Estas, dependen de sus características petrográficas y repercuten en sus propiedades mecánicas. Por ello, este estudio comparativo con técnicas y ensayos normalizados ha analizado estos morteros desde un punto de vista petrográfico, petrofísico y mecánico. Los procesos químicos y porosidad originados durante la elaboración y posterior curado de los morteros explican su comportamiento físico (dureza, resistencia, acceso y retención de fluidos). Este estudio confirma que los morteros de cal aérea son los más porosos y menos resistentes, mientras que los de cemento son los más resistentes e impermeables. Asimismo, los morteros de cales hidráulicas naturales, con características petrográficas semejantes a los de cemento, presentan propiedades físico-mecánicas similares a los aéreos, aunque son más impermeables y resistentes. 2025-07-02T10:38:24Z 2025-07-02T10:38:24Z 2025-03-25 journal article Parra-Fernández C, Varas-Muriel M. 2025. Petrographic and petrophysical characterization of the main aerial and hydraulic mortars used in the construction and rehabilitation sectors. Mater. Construcc. 75(357):e367. [DOI: 10.3989/mc.2025.379124] https://hdl.handle.net/10481/105041 10.3989/mc.2025.379124 eng http://creativecommons.org/licenses/by/4.0/ open access Atribución 4.0 Internacional Consejo Superior de Investigaciones Científicas (CSIC)