Drag reduction of a blunt body through reconfiguration of rear flexible plates

Abstract

We investigate the quasi-static reconfiguration of rear parallel flexible plates on the drag coefficient of a blunt body. The drag coefficient, plates deformation, and main features of the turbulent wake are characterized experimentally in a towing tank. It is found that increasing the flexibility of plates leads to an important drag reduction, induced by the progressive streamlining of the trailing edge due to plates deformation. The study of the Vogel exponent is adopted here to evaluate the limit on the potential drag reduction at large values of the Cauchy number, which is shown to be mainly caused by the growth in the vibrating amplitude response of plates. The plates deformation is analyzed by means of image processing, showing that their shapes mainly follow the first modal form of a cantilever beam deflection, although a slight concavity develops toward the plates tip for large Cauchy numbers. To further analyze this process, the empirical flow loading along the plates is estimated by a modified beam theory assuming a distributed load given by a power law. The experimental fitting shows that for large flexibility, the load diminishes at the rear tip. Besides, the progressive deformation of plates is shown to weaken the shedding of vortices and reduce the size of the recirculation bubble. Finally, an affine direct relationship between recirculation bubble aspect ratio and drag coefficient has been proposed in order to quantify the linkage between near wake modifications and hydrodynamic improvement provided by the trailing edge streamlining.