Thermoelectric Energy Harvesting for Oxygen Determination in Refrigerated Intelligent Packaging
MetadatosAfficher la notice complète
AuteurPérez de Vargas Sansalvador, Isabel María; Capitán Vallvey, Luis Fermín; Martínez Olmos, Antonio; Palma López, Alberto José; Escobedo Araque, Pablo; López Ruiz, Nuria; Carvajal Rodríguez, Miguel Ángel
Oxygen sensorOxygenMeat freshnessFood analysisFood quality sensors
PatrocinadorThis work was supported in part by the Spanish Ministry of Economics and Competivity under Project CTQ2016-78754-C2-1-R and in part by the Unidad de Excelencia de Química aplicada a biomedicina y medioambiente, University of Granada. The work of P. E. Araque was supported by the Spanish Ministry of Education, Culture and Sport (MECD) under Grant FPU13/05032. The work of I. M. P. de Vargas-Sansalvador was supported by the European Unions Horizon 2020 research and innovation program under Grant 706303 (MultiSens)
In this paper, we present a passive tag for the determination of gaseous oxygen in intelligent packaging (IP). The power supply for this tag is obtained from thermoelectric energy harvesting taking advantage of the temperature difference between a cooled package and the human body. For this purpose, a compact Peltier module is attached to the surface of the pack7 age. This device is able to generate 1.2 mW when a temperature difference of 25 °C is applied between its surfaces. A dc-to-dc boost converter is included to generate an output voltage of 3.3 V and an output current of 225 µA from the harvested energy by the Peltier cell, which are used to supply the measurement circuitry. A luminescent membrane sensitive to oxygen is used as a gas detector in the package. The generated signal is compared to a reference value to evaluate if the oxygen concentration inside the package falls below or above a predetermined value. This is shown by turning on a green or a red LED, respectively. The proposed system presents a resolution of 0.02% of the predicted oxygen concentration in the range of interest (0%–5%) and a limit of detection (LOD) of 0.007%, which makes the instrument appropriate to be used in IP and active packaging (AP) technology.