D-shaped body wake control through flexible filaments

Abstract

In this study, we investigate the flow around a canonical blunt body, specifically a D-shaped body of width $D$, in a closed water channel. Our goal is to explore near-wake flow modifications when a series of rigid and flexible plates (l=1.8D) divided into filaments (h=0.2D) are added. We focus on assessing the interaction between the flexible filaments and the wake dynamics, with the aim of reducing the recirculation bubble and decreasing the velocity deficit in the wake. To achieve this, we conduct a comparative study varying the stiffness and position of the filaments at different flow velocities. The study combines Particle Image Velocimetry (PIV) measurements in the wake behind the body with recordings of the deformation of the flexible filaments. Our observations show that the flexible filaments can passively reconfigure in a two-dimensional fashion, with a mean tip deflection angle that increases with the incoming flow velocity. Deflection angles up to approximately ~ 9º and vibration tip amplitude of around ~ 4º are achieved for flow velocities U* ~ u∞/fnD > 1.77, where fn is the natural frequency of the flexible filaments. This reconfiguration results in a reduction of the recirculation bubble and a decrease in the velocity deficit in the wake and the estimated drag compared to the reference and rigid cases. In addition, curved filaments with a prescribed rigid deformation exhibit very similar behavior to that of flexible filaments, indicating that the vibration of flexible filaments does not significantly disturb the wake. The obtained results highlight the interest of testing flexible appendages in the wake of blunt bodies for designing effective flow control devices.